Main features of Zortrax M200:
- High precision (up to 0,09mm/layer)
- Perforated build bed (200 x 200 x 180 mm)
- High manufacturing speed (up to 150 mm/second)
- Compatible for use of third party filaments
- Plug&play 3D printer
- Easy-to-use slicing software (Z-Suite)
- Plug & create
Properly selected heating and cooling points in the extruder solve the frequent problem of inability to release material by the extruder. It can be caused by a change in the physical properties of material associated with temperature.
The use of a two-part platform allows an easy removal of the build platform after the 3D printing process is finished. Thanks to this feature, the finished 3D model can be easily removed without causing any calibration issues or damaging of the component. Perforations on the platform allows to 3D print using materials based on ABS which tend to warp. They prevent the model from peeling off during additive manufacturing process.
Additionally, an extra layer of raft is used as a special base for the object. This is very important when 3D printing large models. The build platform is heated to the correct temperature for each type of filament. With the new Z-Suite slicer software you can set the bed temperature for third-party filaments on your own. Furthermore, the Zortrax M200 allows a wide range of temperatures (from 20° C to 110° C) to 3D print using many kinds of materials.
This 3D printer is fitted with an innovative calibration system which makes sure that the platform is leveled correctly every time. There are five calibrating points located on the platform itself which calculate its exact position. The system can determine on which level the calibrating points should be located. In the case of a slight tilt the extruder adapts to the position of the platform while it’s putting on the first layers of the model. We recommend to level the Zortrax M200 after transportation. Simply follow the instructions on the screen and your build platform will be leveled in under 5 minutes. Until you move the 3D printer, no further calibration will be needed.
X and Y axis system
A system of dual X and Y axises leads the extruder with high precision. Stability and quality of 3D printing is greatly improved by using 8 smooth rods. The build platform moves very smooth and without vibration which is a key factor for good-quality 3D prints.
Single Extruder Support
Creating support structure is easy thanks to Single Extruder Support system (SES). This feature allows to 3D print support structures for complex models without the need of dual extruders and additional material. Support structures are easy to remove and efficient. The system is optimized to use only the exact amount of material needed to support the model.
We recommend to 3D print using Z-Filaments with features dedicated for Zortrax® M200. When you use these filaments good manufacturing results are guaranteed. If you like to experiment with materials we suggest to use PrimaVALUE, PrimaSELECT and EasyPrint filaments for good-value and safe 3D printing.
Option for an enclosed building chamber
If you are working with ABS or materials which tend to warp we advise you to upgrade your Zortrax M200 with side covers and covering. This keeps your build chamber warm and minimizes warping.